Mix Bed Unit

Approx. Rs 28,000 / PieceGet Latest Price

• Cation and Anion resins are combined in a MSRL of FRP vessel to produce ultra pure water.
• Usually a mixed bed unit contains strong acid Cation (SAC) resin and strong base Anion (SBA) resins combined to a ratio of approximately 40% Cation resin to 60% Anion resin. (All resin volumes are dependent upon the feed water analysis and the required quantity of treated water).
• Mixed bed polishers are typically installed when a water quality of less than 1 micro-ohm conductivity is required. Normally mixed bed polishers are installed after a standard Reverse Osmosis or De mineralizer (DM Plant), to produce ultra high-quality water.
• The Cation resins in mixed bed units are of a higher specific gravity and settle at the bottom of the vessel at the same time the Anion resin will automatically float to the top.

• The Cation resin must be a strong acid Cation type (SAC) and the Anion resin must be a strong base Anion resin (SBA)

• (SAC) : Strong Acid Cation resin is washed with approx. 30% hydrochloric acid.
• (SBA) : Strong Base Anion is washed with approx. 26% caustic.

• The above regenerate strengths refer to the values before being diluted by the mixed bed unit educator systems.